StrandVision Digital Signage

715-235-SIGN (7446) | www.StrandVision.com

  1. Home
  2. Digital Signage
  3. Package Options
  4. Pricing Matrix
  5. StrandVision Digital Signage R360 Linux Digital Media Player

StrandVision Digital Signage R360 Linux Digital Media Player

A low cost preconfigured Linux Digital Media Player Appliance for StrandVision Digital Signage…

StrandVision Digital Signage is pleased to offer our R360 pre-configured Linux digital media player appliance. This linux digital signage hardware component is compact, powerful and allows for playback of your StrandVision Digital Signage content in minutes with plug and play connectivity to the StrandVision Digital Signage network.

R360 Linux Player FrontLinux Player Rear

  • Intel Celeron Dual-Core Mobile Processor G1620 2.7GHz 1MB CPU
  • Intel H61 Express Chipset
  • Cooling system with 2 fans
  • Operating temperature: 0~50°C
  • 2GB DDR3-1033 204 pin SO-DIMM
  • 160GB+ Drive 5400 RPM SATA
  • Integrated Intel HD Graphics
  • CentOs Linux preconfigured for StrandVision Player Software System
  • Display output: 1 DVI, 1 HDMI
  • 2 USB Ports Rear, 4 USB Ports Front
  • Full-Size Mini-PCIe slot supports mSATA
  • 2 Serial Port
  • 2x Audio (Line out and microphone)
  • 2x USB 3.0 rear, 2x USB 2.0 front
  • SD card reader
  • Dual Gigabit LAN (RJ45), supports WOL, PXE
  • 2x COM ports (RS232 + RS232/RS422/RS485)
  • Connector for external power button
  • 1 Wireless a/g/n Lan
  • 90 Watt External Fanless Power Supply (19V at 4.74A)
  • 1 Year Parts and Labor Warranty - Return to Depot, 3 year for $89.99
  • VESA 75/100mm mounting hardware included
  • 24Hr Stress Test
  • 7.5 x 6.375 x 1.81 inches (LWH)
  • 190 x 165 x 43 mm (LWH)
  • 3.1 lbs (5.8lbs with packaging and attachments)

Caution: for high ambient temperature over 40°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SODIMM memory with wide temperature range (up to 95°C).

Pricing and Options

  • R360 HD Linux Player ($699.99)
  • Additional 2 year warranty ($89.99)

Mounting Details

The VESA 75 / 100 mounting plates are attached to the back of a free-standing monitor or to a wall. Since the pc is only 3.1 pounds, two diagonal screws is enough to securly hold it. If the screen (or wall mount) has two screws that happen to match up with the VESA 75 or VESA 100 holes, you could attach it there as well.

This photo shows the VESA plates in the approximate position before mounting. With the mount in place, the pc will stand about 2" in height, so if mounting behind a screen, be sure NOT to get a low profile wall mount. 

digital media player mounting plates

This photo shows the pc mostly in place (see the very bottom) and ready to be secured with the include thumb screws. The screws go into any of the holes you see on the top or the same holes on the bottom.

digital media player ready for mounting to plates

Using Obf, Server SV22-8.3-10.1.1.22, Remote 34.237.245.80, Load: 7.6%-4.3%-8@2.7Ghz Intel Xeon E5-2680, MC 13.6MB-415ps(74%), OPC 78.8MB-210ps(100%), Time:0.05082 secs