StrandVision Digital Signage

715-235-SIGN (7446) | www.StrandVision.com

Home > Digital Signage > Package Options > Pricing Matrix > StrandVision Digital Signage R370 Linux Digital Media Player

StrandVision Digital Signage R370 Linux Digital Media Player

A low cost preconfigured Linux Digital Media Player Appliance for StrandVision Digital Signage…

StrandVision Digital Signage is pleased to offer our R370 pre-configured Linux digital media player appliance. This linux digital signage hardware component is compact, powerful and allows for playback of your StrandVision Digital Signage content in minutes with plug and play connectivity to the StrandVision Digital Signage network.

R370 Linux Player Front

Linux Player Rear

  • Intel Celeron G1840 Dual Core Desktop Processor - 2.8GHz,
  • Intel H81 Express Chipset
  • Cooling system with 2 fans
  • Operating temperature: 0~50°C
  • 2GB DDR3-1033 204 pin SO-DIMM
  • 160GB+ Drive 5400 RPM SATA
  • Integrated Intel HD Graphics with one 4K display at 3840 x 2160 (2160p/60hz) or independent dual 1080p displays.
  • CentOs Linux preconfigured for StrandVision Player Software System
  • Display output: 1 HDMI, 2 DisplayPort, Optional VGA port (PVG01)
  • 4x USB 2.0 Ports Front, 2x USB 2.0 Ports Rear, 2x USB 3.0 Ports Rear
  • Full-Size and Half Size Mini-PCIe slot supports mSATA 6G
  • 2x Audio (Line out and microphone)
  • SD card reader
  • Dual Gigabit LAN (RJ45), supports WOL, PXE
  • 2x COM ports (RS232 + RS232/RS422/RS485)
  • Connector for external power button
  • 1 Wireless a/g/n Lan
  • 90 Watt External Fanless Power Supply (19V at 4.74A)
  • 1 Year Parts and Labor Warranty - Return to Depot, 3 year for $89.99
  • VESA 75/100mm mounting hardware included
  • 24Hr Stress Test
  • 7.5 x 6.375 x 1.81 inches (LWH)
  • 190 x 165 x 43 mm (LWH)
  • 3.1 lbs (5.8lbs with packaging and attachments)

Caution: for high ambient temperature over 40°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SODIMM memory with wide temperature range (up to 95°C).

Pricing and Options

  • R370 HD Linux Player ($699.99)
  • Additional 2 year warranty ($89.99)

Mounting Details

The VESA 75 / 100 mounting plates are attached to the back of a free-standing monitor or to a wall. Since the pc is only 3.1 pounds, two diagonal screws is enough to securly hold it. If the screen (or wall mount) has two screws that happen to match up with the VESA 75 or VESA 100 holes, you could attach it there as well.

This photo shows the VESA plates in the approximate position before mounting. With the mount in place, the pc will stand about 2" in height, so if mounting behind a screen, be sure NOT to get a low profile wall mount. 

digital media player mounting plates

This photo shows the pc mostly in place (see the very bottom) and ready to be secured with the include thumb screws. The screws go into any of the holes you see on the top or the same holes on the bottom.

digital media player ready for mounting to plates